Print Pictures In Old Times

Previously, printing photos was quite time-consuming process.
Not that that in our time - sent pictures to print, and a minute later you're done.
Let's see the whole process of printing photographs in the Soviet era.
Film filmed, showing, and dry. Gat enlarger

probably the first time in 10 years, open the lid suitcase.

Foam during that time decayed to the state of the sticky lewdness: (.

to scrub away and start to get parts.

So, like take-all. Recall would now like it's all going:)

What a handsome man;)

Bulb lay the same 10 years. Inside the campaign pieces of glass, clearly audible as they hang out there. The very light matte, the state of the helix is not visible. Okay, cleave to good luck. Includes:

"To get. Lit. True as it dimly. Okay. For authenticity puts a photograph.

Not nifiga light does not shine. Will incorporate enlarger to civilization.

Looks cool. Let's see how will work.

Sad. Get more tusknee. Does not seem to fall into the focal length lens. Experiment for the sake of trying to shine a flashlight with the twisted reflector.

The result exceeds all expectations, but to keep as a flashlight was not an option.

It is time to refill the film. Select the desired masking frame (yes, the framing was not done photoshop and select the desired masking frame, which limited the area of illumination). At the same time put the frosted glass microscope slide into a special pocket on the film.

Well, like anything else interesting. Since the seal disintegrated try to replace it with a glamorous pink napkins.

Helpful to clean enlarger and stumbled upon it.

what is he old. Oh well. Scrub away the most vicious dirty, take it apart.

Energy-saving technologies our all:). The lamp stood as my own, got a nice even light than an incandescent lamp

Lantern way tri-mode. Times:

Two

Well, if the lantern is why not go all the collotype process from scratch? Photo, almost new:)

The workplace of the young photographer. In the bathroom, of course.

Trough with the developer, fixative fixative.

On photographic paper and film can only work when the light red lantern.

Fills the film, put a red piece of glass in front of Lens enlarger, turn on him, choose the position previously filled by paper

The most crucial moment. Remove red piece of glass, count to ten. One, two ...

... Ten. Close the lens, carefully take the paper and developer.

The picture on the paper appeared, wait until it becomes quite clear. The main thing is not overexposed, and it gets messed up and it will be too dark. Everything on a retainer.

Waiting for a while, washed in a basin with clean water and hang to wrap around.

Until the liquid drips from pictures gat glyantsevatel. This heater with mirrored surfaces, which makes our glossy pictures.

Fasten legs, hands, remove the mirror.

Apply this picture to a mirror image. Roll the platen, so that there would be air bubbles.

Put the mirror in place, close the cloth and buttons on top of a special lock. Turn on device and go for coffee.

Waited enough, photos dry out. Glyantsevatel Turn off, remove the cloth and glass. <Previous herself jumping into our hands. Odor svezheprosushennoy pictures stored for life:)