We'd need: 1. Packaging of matches (in the best case, we use only 5 boxes). 2. A box of CD-ROM or a book (it will serve as a table for the assembly, which can easily be rotated without disturbing the design itself) 3. Monetka (ideally - 3 Soviet penny, but you can use a 2-ruble coin. Paper money and credit cards are not fit :-))
Place the box on CD-ROM itself and begin to build. Put two matches side by side, parallel to each other so that a distance between them was slightly less than the length of matches.
On top of doing a flooring of 8 matches. The ends of the matches must lie flat and form a square with those matches that lie below
We place a second layer of planking (8 matches), perpendicular to the first. Matches that lie inside, do not necessarily have to have equal distance between them, but it would be easier if you just put them straight.
Now make a well of 7 series. Try to make it smooth. Heads matches the well should be located on a circle.
Carefully put on top of the well deck of 8 matches. It is desirable that would match the direction of the upper deck was opposite the bottom.
We place the second floor, but now of 6 matches. Extreme 2 matches we'll add later. On top of the resulting structure is pressed against the coin, as the press. Now we can work with a house, holding his finger. If we had not used the coin and matches would be stuck to the fingers and the house would collapse.
Holding a house with one finger, sticks angled vertical matches (at the top of the head) on the edges of the house between the decks.
Matches the lower decking can push the other match, but it should be that would house not pulled off the bottom of matches.
Thus, the four corner match stuck through the upper and lower decks and stand on a box with the disc.
Very carefully sticks a match on the perimeter walls, widening the deck supporting the construction of a match, pressing a finger.
Compress the walls of the house on all four sides. We take out a coin. She will no longer need.
Now the house can be taken in hand. Compressing it from all sides.
Presses a match that went around the perimeter until the end so that they pressed the head deck. The resulting square of the heads of matches will serve as the foundation of the house, that is, from the very beginning we began to build a house at the top.
We put a house on his legal foundation. We have turned frame with protruding in opposite sides of the ends of matches. Now you can collect a house on his hands, so it will be easier. Protruding ends of matches, which we put on the perimeter, will be riding the house.
Making the Wall. Walls will consist of two layers of matches - the vertical and horizontal. Insert vertical matches the one hand house.
Repeat the same with the remaining 3 board walls, inserting all the heads-up matches.
Now put a horizontal layer of the walls. Matches must go in a circle, as in the construction of the well and the head of matches should alternate with the ends of matches. Once all the matches will be inserted, push the head horizontal matches so that they pressed matches next wall.
Ok, almost everything is ready. What remains is the roof. Insert the missing matches in a corner hole and vertical wall matches the bottom, take out their half on top. Do not be afraid, no longer a house collapse.
We place match of the roof perpendicular to the upper flooring. Since the edges and alternating directions of matches, placing first on the 2, then to 4, then to 6 and two middle ranks - to 8 matches.
Now, between the protruding vertical matches insert matches "tile" heads to the middle (rather complex process, will understand why). Presses the "tiles" in a circle-head side matches, pressing on their fingers.
All house is ready. You can decorate the tube (4 entire match is inserted into the roof), windows and door (break in half and matches into the wall).
Keep the product away from children.
No comments:
Post a Comment